Introduce

TOOCAA L2 is a new brand of laser engraver that has popped up on the market this year. Unlike other open-frame laser engravers, the TOOCAA L2 20W is an enclosed diode laser engraver and cutter assuring Class 1 laser safety. The TOOCAA L2 is designed for ease of use with features such as interchangeable laser modules and fast manual laser focusing.

Moreover, TOOCAA L2 20W is more affordable than other enclosed laser engraving machines. If you’re looking for a laser engraving and cutting machine that is safe, enclosed, and can be comfortably used indoors, the TOOCAA L2 is a more affordable alternative to other fully enclosed laser engraving and cutting machines, and it may be an ideal machine for wood crafting.

TOOCAA L2 20W

Unboxing and assembly

I received the TOOCAA L2 20W advanced bundle, including the machine, air assist, honeycomb working panel, and free test materials. The TOOCAA L2, although an enclosed laser engraver, required me to assemble the enclosure before use. Luckily, it wasn’t too difficult, just screwing the components of the enclosure together.

TOOCAA L2 packages
TOOCAA L2 unboxing

After assembling and mounting the enclosure on the TOOCAA L2, the exhaust fan and exhaust pipe were mounted behind the enclosure. And then you will get a class 1 laser safety machine.

TOOCAA L2 assembly

The design of TOOCAA L2

The TOOCAA L2 has a closed design, which serves the purpose of isolating fumes and preventing laser damage. The bottom of the front side is fitted with an LED light bar, which alerts the user whether the machine is working properly or not by showing different colors. And the working area is 415mm*395mm.

Because the TOOCAA L2 is a laser engraver that belongs to Class 1 laser safety, there are other peace-of-mind safety features such as the USB safety lock, open-lid detection, flame detection, and tilt detection in addition to the basic enclosed construction.

The laser head of the TOOCAA L2 is easy to install and has a modular design that allows users to easily replace the laser module with one of the different power levels.

TOOCAA L2 interior structure
Interior structure
TOOCAA L2 laser module
Interchangeable laser module

The TOOCAA L2 uses a conventional manual laser focusing method, which can be easily adjusted by pulling down the distance positioning lever on the laser head when engraving materials or cutting materials under 3mm. When it is necessary to cut thicker material, it is necessary to use the additional supplied focal length positioning metal sheet.

laser foucs when engraving
Adjusting laser focal length when engraving
laser foucs when laser cutting
Adjusting laser focal length when cutting

Although the TOOCAA L2 is equipped with a smoke exhaust system and support for matching air assist, it requires a separate power supply to power it. Therefore, you need to make sure that you have enough power sockets in your home to connect the L2 machine, exhaust fan, and air assist.

Smoke exhaust fan plug
Smoke exhaust fan plug
Air assist plug
Air assist plug

TOOCAA L2 20W performance review

1. 400mm/s engraving speed

I always pay close attention to the engraving speed of laser engraving, because it directly affects my engraving efficiency, and no one wants to spend a lot of time in boring waiting. The TOOCAA L2 officially claims that it can engrave at speeds up to 400mm/s, and this was confirmed in my engraving speed test.

As you can see from the image below, when the laser power is set to 70% and the engraving speed is set to 400mm/s, the plywood can be engraved efficiently in one pass.

TOOCAA L2 20W  engraving testing

2. Cutting 10mm pine wood in one pass

I was also largely satisfied with the cutting ability of the TOOCAA L2 20W as it easily cut through 10mm thick pine wood. In my cutting test of the TOOCAA L2 20W, I set the laser power to 100% and the cutting speed to 1mm/s. As you can see in the picture below, the TOOCAA L2 20W laser engraver easily cuts 10mm pine wood in one pass.

However, when I tested cutting 20mm pine wood, with the same cutting parameters, the TOOCAA L2 20W required 3 passes to cut 20mm pine wood. But as you can see in the picture below, the cut of 20mm pine wood is not perfect and the lower part has been burnt partially.

I gladly accept the result, after all, the laser power of this laser engraver is only 20W. If you want to cut 20mm pine wood easily, you should replace it with a laser cutter of about 40W. I just want to share this cutting test with you as a reference on whether TOOCAA L2 20W can meet most of your cutting needs. If you only need to cut under 10mm thick wood, then the TOOCAA L2 20W will meet your needs.

Cutting 10mm pine wood in one pass
Cutting 10mm pine wood in 1 pass
Cutting 20mm pine wood in 3 pass
Cutting 20mm pine wood in 3 pass

3. Black walnut engraving testing

Now I show the TOOCAA L2 20W’s ability to engrave on wood with an engraving project on black walnut. For the TOOCAA L2 laser engraver to achieve deeper engraving on walnut wood, I set the engraving parameters to 100% laser power and 200mm/s engraving speed. With this engraving parameter, it took 6 minutes to complete the engraving of an 184mm*71mm size.

TOOCAA L2 20W  engraving black walnut

For wood engraving applications, the TOOCAA L2 20W is perfectly suited for perfect engraving. For the engraving shown below, my goal was to be able to achieve a depth of about 1 mm on the black walnut wood. With the above engraving parameters, it did, and the text shows clearly. So when it comes to wood engraving, I am satisfied with the TOOCAA L2 20W laser engraver.

black walnut engraving

4. Super easy for woodcraft cutting

The TOOCAA L2 20W is capable of cutting and making wooden crafts. I used it to make a 140mm*170mm cat-shaped block, with the cutting parameters set to 100% laser power and 10mm/s cutting speed. When cutting 3mm plywood, it is very smooth and accurate. As you can see in the picture below, there are a lot of tiny holes in the cutting file, but TOOCAA L2 can also move accurately to realize the precise cutting of the shape. Of course, since cutting 3mm plywood requires a cutting speed of 10mm/s, the whole process took me about 30 minutes.

cutting plywood
cutting plywood

Gluing each piece of finished plywood in order, I got a piece of artistic wooden crafts. So, I am really satisfied with the TOOCAA L2 20W when it comes to wood cutting and engraving!

wood craft made by TOOCAA L2

Similarly, I used the same cutting parameters to create a second plywood craft, and since the TOOCAA L2 is an enclosed design, the whole process was very comfortable. I enjoyed the creative process and I hope you do the same with the TOOCAA L2.

wooden crafts made by TOOCAA L2 20W

5. Interesting leaf engraving made by TOOCAA L2

I’ve been trying to use a laser engraver to engrave leaves. However, many laser engravers have failed because I can’t find the right engraving parameters on other laser engravers. After all, the leaves are easily burned off by the wrong laser power. But this time using TOOCAA L2 20W, I successfully engraved the leaf.

To make sure the leaf engraving was successful, I converted the original image to black-and-white mode. Then I set the engraving parameters in the LightBurn software to 400mm/s engraving speed, 90% laser power, and 200DPI resolution. The final engraving result is as follows.

leaf laser engraving

Putting the engraved leaf in a transparent frame, I got a nice-looking artwork. I finally succeeded in engraving the leaf on TOOCAA L2, which is the most surprising part of using TOOCAA L2.

leaf laser engraving by TOOCAA L2 20W

6. Stainless steel engraving

The TOOCAA L2 is a diode laser engraver, so it has limited ability to engrave metals like any other diode laser engraver. Of course, stainless steel is a breeze to engrave. The butterfly engraved on stainless steel in the picture below was done with 100% laser power and 100mm/s engraving speed, which took only 1 minute. So TOOCAA L2 20W laser engraving machine can help us to complete personalized engraving in stainless steel metal, such as stainless steel cutlery, knives, stainless steel signs, and so on.

stainless steel laser engraving

I also tested different engraving parameters to explore whether the TOOCAA L2 20W could achieve stainless steel color engraving effects. The answer is yes. With different engraving power and engraving speeds, the TOOCAA L2 20W left patterns with different colors on stainless steel.

stainless steel colorful engraving testing

7. All-around Safety and low working noise

The TOOCAA L2 is an enclosed laser engraver with laser class 1 safety that is pretty well made. In addition to the safe and comfortable feel of use already seen, the TOOCAA L2 has hidden safety features. Here I show you a few safety features of the TOOCAA L2 in use.

First, the open lid stops working safety functions. As you can see in the picture below, when the TOOCAA L2 laser engraver is working normally, the LED strip at the bottom will flash blue light, once I open the lid, the TOOCAA L2 will stop working immediately and flash red light, thus protecting me. This feature is handy.

Working normally
Open lid stops working

Secondly, the device tilts to stop working immediately. This is a feature that users may rarely find. When the device is tilted, this feature allows the laser engraver to immediately stop emitting laser light to protect any and everything around it. Of course, there is also the flame detection function, when the material is on fire, the device can immediately stop working to prevent the flame from continuing to burn. In my case, I have not encountered any material fire problems for the time being, so I do not have to show it intentionally.

Tilt stops working

The noise of the machine’s working is also a safety factor, and if we are disturbed by the noise for a long time, our hearing may be affected. However, after the decibel meter measured TOOCAA L2’s working noise, it showed that even though the exhaust fan and air assist pump are working together, the noise is only about 61 decibels. This is a relatively comfortable working environment.

Low noise

Pros and Cons

Pros

  • Enclosed laser engraver
  • 20W diode laser power
  • All-around safety protection
  • Low working noise
  • 400mm/s engraving speed
  • Good performance on wood cutting
  • Interchangeable laser module design
  • Colorful engraving on stainless steel
  • Nice-looking design

Cons

  • Manual engraving positioning
  • Manual laser focus
  • Multiple outlets are needed to power the exhaust fan, air pump, and machine separately, resulting in a clutter of wires.
  • No wifi connection
  • Need to assemble the enclosure

Final thought

Overall, the TOOCAA L2 strikes a relatively good balance between user-friendliness and price. It is well suited as a tool for making wooden crafts. As a desktop laser engraver for individual consumers, I think it is perfectly suitable for laser engraving enthusiasts. Most importantly, it is more affordable compared to other enclosed laser engravers.