Jerry Wang
Overview
Assume you’re seeking a reliable and economical laser engraver cutter to use for your DIY projects. When you first hold and unbox the Sculpfun S30 Pro Max 20W laser engraver, the sleek and modern design immediately draws your attention. The solid construction and high-quality materials provide the impression of high-end and long-lasting equipment.
When you turn on the laser engraver, you may notice that the noise level is surprisingly low, and the equipment is easy to manage and alter settings. The strong 20W laser is amazing, and the possibility to enlarge the engraving area with the XY-axis expansion kits gives you even more options for different project sizes. Yes, this is the Sculpfun S30 laser engraver that will keep you entertained.
Automatically controlled air assist system
You’ll need a laser engraver with an automatic air assist system if you want accurate and consistent engraving results on a range of materials. The Sculpfun S30 series is equipped with a 32-bit motherboard and a control-type air pump that can intelligently adjust the air-assist switch when engraving by utilizing the LightBurn software M8 button. As a consequence of the flawless cuts and engravings, the machine is ideal for crafting gorgeous and detailed presents.
The laser engraver can modify the quantity of airflow dependent on the material being engraved by using an autonomously regulated air assist system, delivering consistent and high-quality results every time. This not only saves time and avoids waste, but it also helps to extend the machine’s lifespan by reducing laser component damage.
Replaceable protective lens
The Sculpfun S30 Pro Max laser engraver cutter features a revolutionary changeable lens that dramatically improves the laser’s resilience, increasing its lifespan to more than 10 times that of standard lasers. If the lens gets broken or has been in use for an extended length of time, it may be easily replaced to restore the laser’s cutting capability. A free lens is provided with every purchase, and extra lenses may be easily bought through SCULPFUN.
Expandable engraving area on both XY axes
The Sculpfun S30 Pro laser engraver has a breakthrough XY-axis extendable design that allows you to increase the initial engraving area of 370×363 mm. You may increase the engraving area to 935x400mm by purchasing a Y-axis extension kit. Furthermore, by purchasing an XY-axis expansion kit, the engraving area can be increased to 935x905mm, allowing you to tackle bigger engraving or cutting jobs with ease.
Sculpfun Pro Max 20W laser cutting ability
The Sculpfun S30 Pro Max boasts a powerful 20W laser output, ensuring impressive cutting capabilities. Among the various laser power options available in the S30 series, the S30 Pro Max 20W stands out as it can effortlessly cut through 10mm plywood and 15mm paulownia wood in a single pass. Personally, I am a big fan of this laser engraver cutter as it surpasses the cutting ability of other 5W or 10W laser powers. Check out the comparison chart below to see the difference in cutting depth.
Sculfun S30 Pro Max 20W Specification
| Laser Information | |
| Diode laser output power: | 20W (note that this is light energy, not electrical energy) |
| Laser focus: | 0.08×0.1mm |
| Laser wavelength: | 455±5nm |
| Focusing method: | fixed focus column + sliding device |
| Laser protection cover: | Equipped with a detachable laser protection cover to protect the eyes. You can adjust it up and down, or remove the goggles. |
| Machine Information | |
| Engraving accuracy: | 0.005mm |
| Engraving area size: | the standard version is 370mm*363mm, which can be expanded to 935x400mm or 935x905mm |
| Machine power: | 120W |
| Air pump | |
| Type: | mainboard-controlled air pump, voltage 12V, flow 30L/min |
| Air hose inner diameter: | 7.5mm |
| Engraving/cutting materials | |
| Engraving material: | all kinds of wood (including walnut, cherry, and other high-density wood), MDF, zigzag, cardboard, plastic, leather, PCB board, aluminum oxide, 304 stainless steel, ceramic, dark stone |
| Cutting material: | all kinds of wood (including walnut, cherry, and other high-density wood), MDF, acrylic board, cardboard, non-woven, bamboo, leather, some plastic boards, PCB boards |
| Operating software: | LightBurn (with air assist function M8), LaserGRBL, LightBurn, Ben |
Some precautions when using the Sculpfun S30 laser engraver
Laser engraving machines are highly effective tools used in various industries, including manufacturing, art, and design. However, their powerful lasers also pose significant safety risks if not handled with care. it’s essential to understand the necessary precautions to ensure safe operation and prevent accidents. According to Sculpfun’s advice, there are some things we should obey when using the S30 Series laser engraver:
- When using the engraving machine that comes with a potent laser, it is crucial to monitor it continuously. If you are not present, it is necessary to pause the machine.
2. To ensure safe operation, please follow the instructions outlined in the machine manual for setting parameters.
3. It is essential to always install the laser protective cover when utilizing the laser engraving machine. If this is not feasible, wearing protective goggles is crucial.
4. To avoid any injury, do not touch the laser beam with your bare hands. Additionally, be cautious not to cause any strong impact on the machine.
5. Please note that this product is strictly prohibited for children under 14 years of age. Children over 14 years old may only use it under adult supervision.
6. Finally, never point the laser directly at any reflective surface as it may cause harm to the operator or cause burns.
Conclusion
Sculpfun S30 Pro Max 20W laser engraver is the most powerful version of the S30 series. With the coming 2023, the newly launched laser engravers normally have the new update that makes them stand out from each other. In the same way, Sculpfun S30 is the newly launched laser engraving machine, you can see some revolutionary features that set it apart from others.
On Sculpfun’s official website, it costs $919.99. However, it is only available for $799 on Geekbuying. If you are looking for an excellent and affordable laser engraver or cutter, now is a fantastic time to get this newest laser engraving machine.
