Marcus Lau
Overview
xTool pulled the curtain back on the xTool X1 today, and the message is direct: stop juggling separate lasers. The X1 crams gantry-style wide-format cutting, galvo-scale fine engraving, and a swappable laser head into one desktop unit. xTool calls the idea “all the best lasers, built into one.”
The launch happened alongside xTool’s first SMB Summit, with the company pointing at Etsy and Shopify sellers as the target users. No price has been published yet, and shipping dates will follow once the configurator opens.
The xTool X1 is the most ambitious machine xTool has ever shipped. It pairs a 55W CO2 head with a galvo-mounted 20W diode in one frame, and opens support for 30W fiber, 60W MOPA, and 5W UV modules through a shared optical path. The headline speed is 6,000 mm/s, fast enough to challenge dedicated galvo engravers while still cutting full-size panels.
xTool’s framing matters here. They are explicitly trying to dissolve the line between galvo and gantry laser categories, a split that has defined the consumer laser market since the first diode machines arrived. If the X1 holds up under independent testing, it could pressure every other desktop brand to rethink what counts as a single-machine shop.
Key Features
Hybrid Motion four-axis architecture, speed, and area together
The X1 syncs a gantry motion system with a flying galvo head on a single controller. The gantry carries the laser head across large panels, then the galvo takes over for high-speed fine work within the working envelope. The result is one machine that does both wide-format cutting and detailed engraving without a head swap.
Until now, picking gantry or galvo meant giving up either processing area or processing speed. The X1 reports 6,000 mm/s industrial speeds across a “wide-format” working area (final dimensions not yet disclosed by xTool). For a small laser shop running Etsy and Shopify production, that removes the need to own two machines for batch cutting and detailed work.
Laser Swap modular multi-laser system, one machine replaces four
Each laser source feeds into the same galvo head through a shared optical path. The baseline X1 ships with the 55W CO2 + 20W diode combo. Buyers can add 30W fiber for metal marking, 60W MOPA for color metal engraving, or 5W UV for glass and clear acrylic.
A shop that needs CO2 for acrylic, diode for wood, MOPA for anodized aluminum, and UV for glass would otherwise buy four head units. With Laser Swap, those jobs go through the same galvo and software. xTool designed the path alignment to stay stable when the source changes, though the burden of swapping modules cleanly is still up to the user.
UniCast Frame 4,000-ton die-cast aluminum chassis, Frame stiffness matters at 6,000 mm/s
To handle the dynamic loads of dual moving optical systems, xTool engineered a three-piece monolithic aluminum frame. The chassis uses 4,000-ton high-pressure die casting to replace roughly 100 assembled parts and 268 screws that would otherwise stack tolerance errors.
Frame flex and thermal drift are the two silent killers of accuracy in dual-axis machines. Replacing bolted assembly with three die-cast pieces limits tolerance build-up and keeps alignment over long production runs. The carbon-fiber skin claim from the official launch reads marketing-friendly, but the core idea (rigid frame under fast motion) is the right instinct.
Specifications
| Laser Configuration | 55W CO2 + 20W diode (baseline); 30W fiber / 60W MOPA / 5W UV as modular add-ons |
| Motion Architecture | Hybrid Motion four-axis (gantry + galvo) |
| Processing Speed | Up to 6,000 mm/s |
| Frame Material | 4,000-ton die-cast aluminum, three monolithic parts |
| Control Software | xTool Creative Space (XCS) |
| Connectivity | Wi-Fi, USB |
| Status | Announced (Aug 28, 2026) |
| Price | Not yet published |
Editor’s Take
Who the X1 is built for
The xTool X1 makes sense for the serious Etsy or Shopify maker who has been eyeing a Creality Falcon T1 or multi-head desktop setup and wants fewer machines on the bench. It also suits the laser shop that runs 50+ hours a week and needs a single production unit instead of a queue of jobs across different heads. Hobbyists with $2,000 budgets are not the target user here.
Where the X1 stands against Creality Falcon and Glowforge
The Creality Falcon T1 already markets a modular 5-in-1 workstation with interchangeable diode, fiber, UV, and MOPA modules. The xTool X1 matches that idea but adds a 55W CO2 source on top, plus its own dual motion architecture. Glowforge takes the appliance route with enclosed systems, cloud design tools, and pass-through cutting, a different philosophy that does not compete on lens swapping. The X1’s bet is that one chassis doing five jobs ends up cheaper than four separate machines, and the early SMB Summit signal suggests xTool knows which buyers to pitch.
Honest assessment and buying advice
The xTool X1 looks right on paper and the SMB Summit framing is clear. The honest gaps are: no public CAD model of the gantry, no service teardown, and no independent speed tests at the claimed 6,000 mm/s. Until third-party testing publishes, treat the 6,000 mm/s number as xTool’s best case and not field-proven. If you can wait, hold until first review units ship. If you have to order now to lock early-bird pricing, understand you are trusting xTool’s QA on a brand-new machine architecture.
Where to buy (when available)
The X1 is in announced status. xTool has not opened the configurator or pricing. Add-me-to-launch notifications are live on the xTool X1 Facebook Community and the xTool.com product page; sign up there for first access.
FAQ
When can I buy the xTool X1?
Pricing and shipping dates have not been published. xTool expects to open ordering in stages after the SMB Summit rollout. Check the xTool.com product page for the configurator.
What is Hybrid Motion?
It is the four-axis architecture that pairs a gantry motion system with a flying galvo head. The gantry covers large panels, the galvo handles fine detail within the work area, and both run from the same controller.
Can I add metal marking later?
Yes. Laser Swap supports a 30W fiber head for steel and aluminum marking, and a 60W MOPA head for color engraving on stainless and titanium. Modules are sold separately.
How fast is the X1?
xTool quotes up to 6,000 mm/s on Hybrid Motion paths. Independent testing has not yet verified that figure.
Does the X1 replace Glowforge and Falcon T1?
Different category. Glowforge is an enclosed cloud appliance. Creality Falcon T1 is a modular 5-in-1. The xTool X1 is the first desktop that pairs gantry cutting with galvo engraving and swappable laser sources in one frame. Buyers should compare based on what material each unit handles, not on architecture alone.
